Xbr-2300, 2 rear view, 3 environmental requirements – Luxul XBR-2300 User Manual
Page 8: Do not place heavy articles on the xbr-2300, Avoid placement in direct sunlight
8
XBR-2300
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450
LUX-UG-XBR-2300 Vers: 07314
WAN: 2 WAN RJ-45 Ethernet Ports for connecting up to two independent
internet feeds
LAN: 3 LAN RJ-45 Ethernet Ports for connecting to the local network.
NOTE: It is recommended that a Luxul switch be used in conjunction
with the XBR-2300 to increase number of local ports available.
4.2 Rear View
100-240V~ 0.1A 50/60H
z
XBR-2300 Rear View
Power Input: Please use the included power cable
4.3 Environmental Requirements
Ethernet Cables to connect the XBR-2300 to Ethernet enabled devices
Computer supporting TCP/IP and equipped with a Web browser. Supported Web
browser versions include Microsoft IE 9.0 and up, Safari 5.1 and up, Mozilla Firefox 24
and up, and Google Chrome 18 and up. The Web browser is used to configure
the XBR-2300.
Install the XBR-2300 in a stable/safe place to avoid any possible damage
Make sure there is adequate space around the XBR-2300 for adequate ventilation
and proper heat dissipation. It is recommended to have at least 4-6 inches around
all sides.
Do not place heavy articles on the XBR-2300.
Power outlets should be within 5 feet of the XBR-2300.
Verify the ground connection of the outlet is functioning properly.
Check the power cord to confirm a secure connection.
Avoid placement in direct sunlight.
When installing the XBR-2300 on a flat surface, attach the rubber feet
to the bottom of the device to avoid scratching the surface.