beautypg.com

Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 User Manual

Page 169

background image

Appendices

168

4. Save the calibration and then flash the new calibration to the vehicle.

5. Refer to the

Pulses Per Degrees

section of these instructions for information on how to calibrate the RPM

pulse count on the NCC-002.

6. Since no other device will be connected to the tachometer signal output or the ECM, make sure to enable the

pull-up resistor on the NCC-002.

NOTE: Similar changes will be required if using HP Tuners or any other programming system