Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 111)

Setup Menu 110
Access from the Computer Program:
From the
Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"Arming Input Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the
Arming Input Control Option or un-check the box to disable the option.
Clutch Input Control Option
If this option is enabled, the selected Relay output is controlled by the state of the Clutch Input and any other
control options that are enabled.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Clutch
Input Ctrl" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.
Access from the Computer Program:
From the
Status screen , select the relay by pressing either the "Relay1" button or the "Relay2" button. The
"Clutch Input Enable" option is located in the "Relay Control Options" dialog box. Check the box to enable the
Clutch Input Control Option or un-check the box to disable the option.
Shift Input Control Option
If this option is enabled, the selected Relay output is controlled by the state of the Shift input and any other
control options that are enabled.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the desired
Relay Menu is highlighted and then press the “ENTER” button. Press the "ENTER" button to select the "Shift
Input Ctrl" option, then the “YES” or “NO” button to change the current selection. If the “NO” button is pressed no
change will be made.