Lingenfelter L460240000 Lingenfelter NCC-002 Nitrous Control Center v1.5 - Manual (Page 120)

Lingenfelter NCC-002 Nitrous Control Center Installation and Operating Instructions 119
Nitrous1 and Nitrous2 Minimum (ON) MPH Setting
This setting dictates the minimum MPH at which either Nitrous1 or Nitrous2 can still be active.
The valid range is 0-255 in 1 MPH increments.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the Hall
Input Menu selection is highlighted, and then press the “ENTER” button twice. Press the "DOWN" arrow button
until the either the Nitrous1 or Nitrous2 minimum MPH selection is highlighted and then press the "ENTER"
button. Use the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button to accept the
new setting or press the “ESC” button to exit with no change.
Access from the Computer Program:
From the
Status screen , press either the "Nitrous1" or "Nitrous2" buttons. The "Nitrous ON MPH" setting is
found in the "Nitrous Control MPH" dialog box under the "Options" Tab. Click the "UP" and "DOWN" arrow
buttons or type in any numeric value in the valid ranges shown above.
Nitrous1 and Nitrous2 Maximum (OFF) MPH Setting
This setting dictates the maximum MPH at which either Nitrous1 or Nitrous2 is activated.
The valid range is 0-255 in 1 MPH increments.
Access from the Controller:
From the
Main screen , press the “SETUP” button. Press the “DOWN” arrow button repeatedly until the Hall
Input Menu selection is highlighted, and then press the “ENTER” button twice. Press the "DOWN" arrow button
until the either the Nitrous1 or Nitrous2 maximum MPH selection is highlighted and then press the "ENTER"
button. Use the “LEFT” and ”RIGHT” arrow buttons adjust the setting. Press the “SAVE” button to accept the
new setting or press the “ESC” button to exit with no change.