beautypg.com

Accesories – Hanna Instruments PCA 310 User Manual

Page 74

background image

74

Recharge the SIM card and change the expiration date or
set the “Chk. Charge” Inactive.

“GSM No Credit

GSM No Credit

GSM No Credit

GSM No Credit

GSM No Credit”: appears on LCD

The number of remaining SMS is 0.
Recharge the SIM card and change the “Remaining” SMS
value, or set the “Chk.Charge” Inactive.

“GSM Not Respond

GSM Not Respond

GSM Not Respond

GSM Not Respond

GSM Not Respond”: appears on LCD

The GSM modem not respond.
Check the data cable between GSM module and PCA, check
the GSM module power supply and wait for auto retry.

“GSM Network Error

GSM Network Error

GSM Network Error

GSM Network Error

GSM Network Error”: appears on LCD

The GSM network not respond.
Check the GSM module antenna and wait for auto retry.

“Pwr rst

Pwr rst

Pwr rst

Pwr rst

Pwr rst”: appears on SMS

There was a reset on the analyzer.
Check the main power supply for the cause of dropout.

“pH calibration Old

pH calibration Old

pH calibration Old

pH calibration Old

pH calibration Old” on LCD and “pH Cal

pH Cal

pH Cal

pH Cal

pH Cal” on SMS

The pH calibration is older than 1 months.
Calibrate the pH probe.

“No pH Calibration

No pH Calibration

No pH Calibration

No pH Calibration

No pH Calibration” appears on LCD

The pH channel was not calibrated.
Appears after “Set Default pH Cal.” or after EEPROM
error. In the last case, call Hanna service.

“No ORP Calibration

No ORP Calibration

No ORP Calibration

No ORP Calibration

No ORP Calibration” on LCD and “No ORP Cal

No ORP Cal

No ORP Cal

No ORP Cal

No ORP Cal” on SMS

The ORP channel was not calibrated.
Appears after EEPROM error. Call Hanna service.

“No T

No T

No T

No T

No Temp. Cal

emp. Cal

emp. Cal

emp. Cal

emp. Cal” on LCD and “No T Cal

No T Cal

No T Cal

No T Cal

No T Cal” on SMS

The Temperature channel was not calibrated.
Appears after EEPROM error. Call Hanna service.

ACCESORIES

ChecktempC

Thermometer (-50.0 to 150.0 ºC)

pHep5

pH meter (0.00 to 14.00pH)

ORP

ORP tester (+/-999 mV)

HI 1005

pH/temperature process probe

HI 2008

ORP process probe

HI 504900

GSM transmitter

HI 704731

Complete set of tubes from pressure regulator to drain PCA 310

HI 704732

Complete set of tubes from electrode holder to drain PCA 320-330

HI 70474

Peristaltic pump tube (6 pcs)

This manual is related to the following products: