Hanna Instruments PCA 310 - Manual (Page 6)

6
PRELIMINARY EXAMINATION
Remove the analyzer from the packing material and examine
it carefully to make sure that no damage has occurred during
shipping. If there is any noticeable damage, notify your dealer
immediately.
Each analyzer is supplied complete with:
• 2 reagent bottles (1 indicator and 1 buffer solution)
• 2 reagent bottle caps
• 1 DPD compound powder
• tubing
Note: Save all packing materials until you are sure that the instru-
ment functions correctly. Any damaged or defective items must
be returned in their original packing materials together with
the supplied accessories.
WARNING: The PCA 310 - PCA 330 series of Chlorine, pH and ORP
Analyzers are not designed for use with samples that are in-
flammable or explosive in nature. If any sample solution other
than water is used with these products, test the sample/prod-
uct compatibility to assure user safety and proper product per-
formance.
Safety Precautions: Please take the time to read the safety precautions
carefully wherever they appear in this manual. They are pro-
vided to prevent personal injury and damage to the instru-
ment. This safety information applies to the operators and ser-
vice personnel and the following two captions are used:
CAUTION: : : : : identifies conditions or practices that could result in dam-
age to the instrument or persons;
Warning::::: identifies conditions or practices that could result in personal
injury or loss of life.
Note: Because of the inherent dangers in handling chemical samples,
standards and reagents, HANNA Instruments strongly rec-
ommends the users of this product to review the Material Safety
Data Sheets and become familiar with safe handling proce-
dures and proper usage prior to handling any chemicals.