Hanna Instruments PCA 310 - Manual (Page 33)

33
GENERAL SETTINGS
The analyzer settings,
common for all mea-
surements, are grouped
in “General Menu”.
CHANGING THE PASSWORD
The password is a numeric value with 4 digits.
To change the password, enter in “General Menu” - “System
Functions” and edit the “Change Pass” line. Press “CFM” to
save.
After new value is confirmed, the displayed password is set to
0000 for protection against unauthorized reading.
SETTING THE LANGUAGE
The PCA 310-330 analyzers has 4 languages stored inside.
The user could easily change the language without restarting
the analyzer.
To select a new language, enter in “General Menu” - “Language
Change” and select the new language. After pressing “CFM”
key, the new language is loaded.
ANALYZER SERIAL NUMBER AND SOFTWARE VERSION
The unique serial number can be viewed by selecting the “Gen-
eral Menu” - “System Functions” - “Serial Nr.”.
Serial number is not editable.
The software version is displayed each time the analyzer is
turned on and lasts during the initialization phase.
TIME AND DATE
The PCA 310-330 analyzers have a built in real time clock.
When the analyzer is in normal mode, the current time is
displayed on the right side of the display in HH:MM format.
To set the time and
date, select the “Gen-
eral Menu” - “Time
and Date”. Set the time
and the date as de-
scribed in the User in-
terface chapter.
Set Time: 10:31
Set Date:2004/01/01
System Log
Analog Output
SMS Settings
Serial & GSM Comm.
Time and Date
System Functions
Language Change