Hanna Instruments PCA 310 - Manual (Page 27)

27
USER INTERFACE
PANELS ORGANIZATION
The PCA 310 – 330 analyzers provide a friendly interface that
display all important parameters of the analyzer. The appearance
of the display could be selected by the user.
The panels are organized
in circular loops. PCA
330 has a main loop
where panels with all
measurements are dis-
played, chlorine mea-
surement loop, pH mea-
surement loop, tempera-
ture measurement loop
and ORP measurement
loop where only informa-
tion related to the pa-
rameter is displayed.
PCA 320 has the same structure but without the ORP mea-
surement panels.
PCA 310 has only the chlorine measurement panels.
Pressing “UP” and “DOWN” keys will move inside loop in a
circular way (after last panel, the first panel is displayed). Press-
ing “CFM” to move from main panels to measurement panels.
Pressing “ESC” to move from measurement panels to main
panels.
MAIN PANELS
At startup the display
shows one of the
main panels. This
panel contains the
chlorine, pH, ORP
and temperature values and the related measuring units. The
panel contains also the current time and the alarm / error
status.
Other panels are available by pressing “UP” or “DOWN”
keys. On each of this panels one measurement is displayed
on the left side and the others on the right side.
Main panels
Cl
panels
pH
panels
Te
m
p.
panels
ORP
panels
CFM
UP
DOWN
CFM CFM
CFM
ESC ESC ESC ESC
UP/DOWN