Hanna Instruments PCA 310 - Manual (Page 48)

48
TEMPERATURE SETTINGS (PCA 320, PCA 330)
Settings related to
temperature mea-
surement are grouped
in “Temperature
Menu”. The following
options are available:
UNITS
The analyzer could display the Temperature using Celsius or
Fahrenheit temperature units.
To select the temperature units, edit the “Temperature Menu” -
“Units” line. Select Celsius or Fahrenheit and confirm.
Note: The temperature values sent via SMS are always the Celsius
values.
MEASURE INFO
The analyzer calculates the maximum and minimum tempera-
ture value since the first measurement.
The maximum and minimum can be quickly consulted on one
temperature measuring panel.
For more detailed information select “Temperature Menu” -
“Measure Info”. The
“Max. Value” and
“Min. Value” are dis-
played and also time
stamp when maxi-
mum and minimum
occurs are displayed
in this menu.
To reset the maximum or minimum values, select the functions
“Temperature Menu” - “Measure Info” - “Clear Max. value”
or “Temperature Menu” - “Measure Info” - “Clear Min. value”
The maximum or minimum value is set to the current read
value.
ANALOG OUTPUT
The type of analog output could be set as described in “Ana-
log output” chapter. The analog output span for temperature
could be set in the “Temperature Menu” - “Analog Output
Temp.”.