Hanna Instruments HI 4211 - Manual (Page 61)

6 1
• Press , or to select the desired Log
Report type. All logged lots for the selected Log Report type
will be displayed on the LCD.
• To filter the displayed lots, press and then the
desired unit ( , or – HI 4212 only).
Only the selected measurement unit lots will be displayed
on the LCD.
• Select the desired lot with or and press
to display the logged data from the highlighted lot.
The “Please wait...” message will be displayed on the LCD
for one second. The selected Logging Data Configuration
options will be displayed on the LCD, together with GLP
information (last calibration date and calibrated buffers/
standards) if a calibration has been performed on the se-
lected mode, and the logged values (measured value, mV
value, temperature value, temperature compensation mode
and the logging time).
Note: For automatic logging only, it is possible to view the
plotted graph.
• Press
to display the graph.
• By pressing it is possible to move the graph
along the X or Y axis with the arrow keys.
• If pressing while the graph is displayed, the
zoom menu for the X and Y axes will be accessed.
Press
, or / / /
to switch between the active zooming axes
and then zoom in or out on the selected axis by
pressing the appropriate virtual key.
• Press to return to the previous menu at any time.