Hanna Instruments HI 4211 - Manual (Page 16)

1 6
To set the GLP Data:
• Press while in Measure mode.
• Press .
• Use or to select the GLP Data option.
• Press and use or to highlight the
desired option.
• Press to edit the desired information. The Text Editor menu
will be displayed on the LCD.
• Enter the desired information by accepting the highlighted character
which is added to the text bar, using . The and
keys help the user select the desired character. It is also
possible to delete the last character by positioning the cursor on the
Backspace character ( ) and pressing
.
• Press to return to the GLP Data options. If the Saving Confirmation is enabled, press to accept
the modified option, to escape without saving or to return to the editing mode. Otherwise,
the modified options are saved automatically.
Date & Time
This option allows the user to set the current date & time and the format in which they appear. These parameters
will be displayed on the
Measure screens and also when storing measured data.
Set Date and Time
This option allows you to set the current date (year/month/day) and time (hour/minute/second).
Notes: • Only years starting with 2000 are accepted.
• The time is set using the selected time format. For 12 Hour time format only, the AM/PM can also
be selected with or .
Set Time Format
This option allows you to choose between 12 Hour (AM/PM) time format and 24 Hour time format from the
displayed pop-up menu.
Set Date Format
This option allows you to choose the desired date format from 6 available options: DD/MM/YYYY; MM/DD/YYYY;
YYYY/MM/DD; Mon DD, YYYY; DD-MM-YYYY and YYYY-Mon-DD.
To set the Date & Time:
• Press
while in Measure mode.
• Press .