Hanna Instruments HI 4211 - Manual (Page 27)

2 7
To set the Reading Mode:
• Press
while in pH Measure mode.
• Press .
• Use or to select the Reading Mode option.
• Press and use or to highlight the
desired option.
• Press to confirm your selection or press to
cancel operation.
Log
This option allows the user to edit the logging settings: Logging Type, Logging Data Configuration, Sampling Period
and New Lot.
Logging Type
Three logging types are available: Automatic, Manual and AutoHold. With the Automatic type the values are
logged automatically at constant time intervals while with the Manual type the user has the capability to log a
measured value by pressing
. With the AutoHold type the stored values are only the ones frozen on the LCD
after the logging session was started.
To set the Logging Type:
• Press
while in pH Measure mode.
• Press .
• Use or to select the Log option.
• Press and use or to highlight the
Logging Type option.
• Press and use or to highlight the
desired option.
• Press to confirm your selection or press to
cancel operation.
Logging Data Configuration
This option allows the user to select the parameters that accompany a logged value: Date/Time/Channel,
Calibration Data, Sample ID, Instrument ID, Operator ID, Company Name, Aditional Info 1 and Aditional Info 2.