EXFO FTB-635 Wideband Copper and DSL Test Module - Manual (Page 322)

xDSL Tests: Using the Main Menu
314 FTB-635
Test Configuration

Priority sets the priority of the VLAN with a value ranging from
0 through 7.

ID is a VLAN tag ranging from 0 through 4094. The entry is available
only when VLAN is enabled.

NAT is the network address translation (NAT), which either enables the
unit to use a public router address for all outgoing packets, or exposes
the private LAN IP address to the WAN, if disabled.

Mac Address is a specific Mac address in a hexadecimal format, if
User Defined is selected. Otherwise, select Device Mac. This entry is
available only when Access Mode is DHCP or Static for ADSL2+.

Login

User name is your user ID, maximum 128 digits/text.

Password is your password, maximum 128 digits/text.

WAN login timeout is a numeric setup entry.

Static IP is the address of the current location assigned by the service
provider. This entry is available only if Access mode is set to IPoA or
Static.

IP address is the address for the unit that is actively connected to
your network or the internet at the time of login.

Subnet mask is the network address used to identify if the IP
address is within the same wide area network.

Default gateway is the IP address of the default gateway.

DNS server 1 is the address of the primary domain name server to
be used by the unit. If DNS is unavailable, enter 0.0.0.0.

DNS server 2 is the address of the secondary domain name server
to be used by the unit. If DNS is unavailable, enter 0.0.0.0.