EXFO FTB-2 - Manual (Page 417)

Communicating Through TCP/IP over Telnet
FTB-2 and FTB-2 Pro 407
Activating TCP/IP over Telnet
Activating TCP/IP over Telnet
The TCP/IP over Telnet Service, which is part of the EXFO Instrument
Control, is a mediator between the Telnet client and the test instrument.
Any request from the Telnet client will be transferred to IcExecutive.
IcExecutive then passes the request to the appropriate instrument. The
instrument executes the request and returns the response to IcExecutive
and to TCP/IP over Telnet accordingly.
To activate TCP/IP over Telnet:
1. Access the Instrument Control Configuration utility:

On an IQS-600: From IQS Manager, click the Utilities function tab,
and then click Instrument Control Configuration.

On an FTB-500: From ToolBox, tap the System Settings button,
then tap Instrument Control Configuration.

On an FTB-2 or FTB-2 Pro: From ToolBox X, tap the System
Settings button, then tap Instrument Control Configuration.
2. If necessary, click or tap Change settings, and then, when the
application prompts you to authorize the changes to your unit
(identified as “computer”), select Yes.
3. Under Platform Startup, select Remote.