EXFO FTB-2 - Manual (Page 156)

Managing Data
146 FTB-2 and FTB-2 Pro
Connecting to a Wireless Network
Connecting to a Wireless Network
If you have purchased the Wi-Fi and Bluetooth option, you can connect to
a wireless network and benefit from all resources that are available on this
network. You can transfer data exactly as you would do from an Ethernet
network. By default, the internal wireless module is enabled, but not
connected to a network.
If you have disabled the Wi-Fi device, you must enable it before trying to
connect to a wireless network (see Enabling or Disabling the Wireless
Communication on page 158).
Note: To save power when your unit is running on batteries, you may wish to
disable the Wi-Fi device when you do not use it.
To connect to a wireless network:
1. From the right side of the screen, swipe left to display the Charm bar.
2. Tap Settings, and then the icon.