beautypg.com

EXFO FTB-2 User Manual

Page 279

background image

Maintenance

FTB-2 and FTB-2 Pro

269

Installing or Removing the Power Meter and VFL

10. Using a screwdriver, secure the power meter in place with the screws

that you have removed at step 5.

11. Remove your antistatic strap.

12. Connect your unit to an external power source if desired.

13. If it is not already done, turn on your unit.

14. Start the power meter application to ensure that the instrument is

working properly.

Note: If the power meter is not detected, this could mean that it is not inserted

properly in the unit. In this case, repeat the installation procedure. If the
problem persists, contact EXFO.

This manual is related to the following products: