EXFO FTB-2 User Manual
Page 288
Troubleshooting
278
FTB-2 and FTB-2 Pro
Solving Common Problems
My unit is running slower
than expected.
The configuration of some
of the Windows
components is underway in
the background.
The first few times that you
start your unit, after a reset
operation, of after certain
updates, you may notice
that the performance of your
unit is not optimum.
If this is the case, you may
want to leave your unit idle
for about an hour to give
Windows the time to
complete its configuration
tasks.
My unit is not responding.
The system has
encountered a problem.
Press the On/Off button for
at least fifteen seconds to
force a hardware reset on
the unit.
The screen does not keep its
calibration.
OR
The screen is hard to
calibrate properly.
The screen was calibrated
using the tool provided with
Windows instead of the tool
provided with ToolBox X.
From the Control Panel,
go to Hardware and
Sound > Tablet PC
Settings.
Tap Reset.
If you need to perform
further adjustments to
the calibration, from
ToolBox X, tap System
Settings > Touch
Screen Calibration.
Problem
Possible Cause
Solution