EXFO FIP-400 Fiber Inspection Probe and ConnectorMax - Manual (Page 27)

Setting up Your Fiber Inspection Probe and ConnectorMax
Fiber Inspection Probe 21
Identifying Fibers
2. Select the Identification tab.
3. Fill out the boxes with the desired information. The identification will
increment the file name automatically using the step size you select.
In multiple-fiber connector mode, the start and stop values can be
used to indicate the number of fibers in the connector. The application
will prompt you to save the acquisition after you have reached the stop
number value.
4. Click Apply to confirm your choice and continue working in the User
Preference window, or OK to confirm your choice and close the
window.