Eurocom M590K EMPEROR - Manual (Page 92)

Upgrading The Computer
6 - 4 Upgrading the Hard Disk Drive(s)
6
Upgrading the Hard Disk Drive(s)
The hard disk drive(s) can be taken out to accommodate other 2.5" serial (SATA II)
hard disk drives with a height of 9.5mm (h) (see
“Storage Options” on page C - 3 ).
Follow your operating system’s installation instructions, and install all necessary
drivers and utilities (as outlined in
“Drivers & Utilities” on page 4 - 1 ), when setting
up a new hard disk.
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the hard disk bay cover and remove screws - .
3. Remove the bay cover .
HDD System Warning
New HDD’s are blank. Be-
fore you begin make sure:
You have backed up any
data you want to keep from
your old HDD.
You have all the CD-ROMs
and FDDs required to in-
stall your operating system
and programs.
If you have access to the in-
ternet, download the latest
application and hardware
driver updates for the oper-
ating system you plan to in-
stall. Copy these to a
removable medium.
1 3
4
Figure 6 - 2
HDD Bay Cover
Removal
1 3
4
2