Eurocom M590K EMPEROR - Manual (Page 116)

Modules
7 - 16 Mini-PCI TV Tuner Module
7
Digital TV Broadcast Signal
The antenna is the most crucial factor in receiving a clear Digital Terrestrial TV
broadcast signal. The passive antenna provided should provide a clear signal when
placed beside a window. If the signal is not clear then you can purchase an active
antenna (it should also be placed beside a window) to improve the signal. You
should also check with any related government website which provides information
on Digital Terrestrial TV coverage for your area. Note that (unlike standard analog
TV) if the digital signal is weak then no picture will appear on the TV at all.
Setting S/PDIF for Audio Output in Cyberlink Power DVD
If you want to use the S/PDIF-Out jack for audio output in the Cyberlink Power
DVD application, then you should configure the application as follows:
1. Connect the speakers to the S/PDIF-Out Jack.
2. Run the Power DVD application.
3. Right-click the screen, then scroll down and select the Configuration menu item.
4. Click Audio (tab).
5. Select SPDIF from the Speaker Environment menu.
6. Click OK.
7. The system is now set up to play the sound through the S/PDIF-Out Jack, however
note that audio output will only be played through the external speakers, and
not the system speakers.