I/o device configuration (advanced menu), Reset configuration data (advanced menu), Power on boot beep (advanced menu) – Eurocom M590K EMPEROR User Manual

Page 83: Battery low alarm beep: (advanced menu), Bios (see, I/o device con, For further

Text mode
Original mode

BIOS Utilities

Advanced Menu 5 - 9

I/O Device Configuration (Advanced Menu)

The sub-menus under this item allow you to enable/disable the Serial port A (Serial
Mouse), and FIR (Infrared) transceiver.

Reset Configuration Data (Advanced Menu)

This item is set to No as default. You can change the setting to Yes if you have in-
stalled a new add-on which has reconfigured the system, resulting in such a serious
system conflict that the operating system is unable to boot.

Power On Boot Beep (Advanced Menu)

Use this menu to enable/disable the single beep sound at the end of the POST. This
item is “Disabled” by default.

Battery Low Alarm Beep: (Advanced Menu)

Use this menu item to enable/disable the battery low alarm beep.