beautypg.com

Intel turbo memory module, Intel turbo memory setup, English – Eurocom TN12R Tablet User Manual

Page 42

background image

Concise User’s Guide

36 - Intel Turbo Memory Module

English

Intel Turbo Memory Module

If you have included an Intel Turbo Memory (Robson)
NAND flash memory card module

in your purchase op-

tion, then you will need to enable the option in the BIOS
BEFORE installing the Windows Vista operating system
software (do not enable this option in Windows XP or on
a Windows Vista operating system that has been installed
without the option enabled).

Intel Turbo Memory Technology (also known

as

Rob-

son flash memory) is an Intel technology that reduces
the time it takes for a computer to boot up, to load appli-
cations, and to write data to the hard drive. Intel Turbo
Memory
Technology is supported in Windows Vista only
(it also supports Windows Vista features such as Ready-
Boost, ReadyDrive, and Superfetch).

Intel Turbo Memory Setup

1.

Start-up your computer and press F2 to enter the BIOS.

2.

Go to the Advanced menu.

3.

Select Sata Control Sub-Menu and press Enter.

4.

Use the spacebar and Enter to set SATA to Enhanced.

5.

Use the spacebar and Enter to set AHCI Configuration
to Enabled.

6.

Use the spacebar and Enter to set DFOROM (Robson)
Support
to Enabled.

Figure 22 - Sata Control Sub-Menu (BIOS Ad-

vanced Menu)

7.

Go to the Boot menu.

8.

Set the CD-ROM/DVD-ROM Drive (make sure the
Microsoft Windows Vista OS CD is inserted) as the first
device in the boot order from the Boot priority order
menu.

9.

Select Exit Saving Changes from the Exit menu (or
press F10 and Enter) and press Enter to exit the BIOS
and reboot the computer.

10. As the computer starts up, press a key when you see the

message "Press any key to boot from CD or DVD".

F1

Help

Select Item

-/+

Change Values

F9

Setup Defaults

Esc

Exit

Select Menu

Enter

Select

Sub-Menu

F10

Save and Exit

Item Specific Help

Controls if DFOROM

Support is enabled

during POST.

Advanced

SATA:

[Enhanced]

AHCI Configuration:

[Disabled]

DFOROM (Robson) Support:

[

Enabled

]

Disabled

Enabled

Phoenix TrustedCore(tm) Setup Utility

Sata Control Sub-Menu