Eurocom TN12R Tablet - Manual (Page 25)

System Map: Right & Left Views - 19
Concise User’s Guide
Engl
ish
System Map: Right & Left Views
Figure 10
Right & Left Views
1. Stylus Pen Holder
2. Optical Device (for
DVD Device)
3. Emergency Eject Hole
4. USB 2.0 Port
5. RJ-11 Phone Jack
6. RJ-45 LAN Jack
7. External Monitor Port
8. Mini-IEEE 1394 Port
(supports SELF
Powered IEEE 1394
devices only)
9. Vent
10. ExpressCard/54(34)
Slot
1 5
2
4
7 9 8
3
Changing DVD Regional Codes
Go to the Control Panel and double-click Device
Manager (Hardware and Sound), then click the +
next to DVD/CD-ROM drives. Double-click on the
DVD-ROM device to bring up the Properties dialog
box, and select the DVD Region (tab) to bring up the
control panel to allow you to adjust the regional
code.
DVD region detection is device dependent, not OS-
dependent. You can select your module’s region
code 5 times. The fifth selection is permanent. This
cannot be altered even if you change your operating
system or you use the module in another computer.
CD Emergency Eject
If you need to manually eject a CD/DVD
(e.g. due to an unexpected power inter-
ruption) you may push the end of a
straightened paper clip into the emer-
gency eject hole. Do not use a sharp-
ened pencil or similar object that may
break and become lodged in the hole.
Media Warning
Don’t try to remove a floppy disk/CD/
DVD while the system is accessing it.
This may cause the system to “crash”.
Left
Right 6
10