System startup, System startup -5 – Eurocom M4 User Manual
Page 35
System Startup 1 - 5
Quick Start Guide
1
System Startup
1.
Remove all packing materials, and place the computer on a stable surface.
2.
Securely attach any peripherals you want to use with the notebook (e.g. keyboard and mouse) to their ports.
3.
Make sure the battery is inserted and locked in position.
4.
Attach the AC/DC adapter to the DC-In jack on the right of the computer, then plug the AC power cord into an
outlet, and connect the AC power cord to the AC/DC adapter (make sure you use the adapter when first
setting up the computer, as to safeguard the computer during shipping the battery will be locked to not power
the system until first connected to the AC/DC adapter).
5.
Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 130 degrees); use the other
hand to support the base of the computer (Note: Never lift the computer by the lid/LCD).
6.
Press the power button on the top right of the computer for about 2 - 3 seconds to turn the computer “on” (note
that the power LED on the front of the computer will turn from orange to green when the computer powers
on).
Figure 1 - 1 - Opening the Lid/LCD & Computer with AC/DC Adapter Plugged-In
130
°
Shutdown
Note that you should always
shut your computer down by
choosing the Shut Down com-
mand in Windows (see page
). This will help prevent
hard disk or system problems.