Ditch Witch RT115 - Manual (Page 23)

RT115 Tier 3 - CONTROLS 23
CONTROL CONSOLE DESCRIPTIONS
RT115 Tier 3 - CONTROLS 23
CONTROL CONSOLE DESCRIPTIONS
Operator Alert Indicator
This indicator alerts operator to
Tier 3 engine fault conditions.
• Light flashes when a "warning"
fault is present.
• Light is steady when "engine
shutdown" fault is present.
Cold Start Wait Indicator
This indicator lights when intake
air pre-heater is operating.
If lamp is on, wait until lamp goes
out before starting engine.
IMPORTANT: For more information about the diagnostic
system and trouble codes see "Tier 3 Service Overview" in
SERVICE.
IMPORTANT:
• If ignition key is turned to START before wait lamp goes
out, the system is disabled and must be reset.
• Turn ignition key to OFF, then to RUN to reset.
Operator Alert Indicator
This indicator alerts operator to
Tier 3 engine fault conditions.
• Light flashes when a "warning"
fault is present.
• Light is steady when "engine
shutdown" fault is present.
Cold Start Wait Indicator
This indicator lights when intake
air pre-heater is operating.
If lamp is on, wait until lamp goes
out before starting engine.
IMPORTANT: For more information about the diagnostic
system and trouble codes see "Tier 3 Service Overview" in
SERVICE.
IMPORTANT:
• If ignition key is turned to START before wait lamp goes
out, the system is disabled and must be reset.
• Turn ignition key to OFF, then to RUN to reset.