Ditch Witch RT115 - Manual (Page 122)

RT115 Tier 3- SAW ATTACHMENT
OPERATION
122 RT115 Tier 3 - SAW ATTACHMENT
OPERATION
1. Adjust throttle to low idle.
2. Move attachment speed/direction control to desired speed.
SAW WILL TURN.
3. Slowly lower saw to trench depth.
4. Release parking brake and verify parking brake indicator is
off.
5. Increase engine speed to full throttle.
Flying objects thrown by
machine may strike people. Wear hard hat and
safety glasses.
Moving digging teeth will kill you
or cut off arm or leg. Stay away.
NOTICE:
• Machine might jerk when digging starts. Allow 3’
(1 m) between digging teeth and obstacle.
• Keep everyone at least 6’ (2 m) from machine, attachments,
and their range of movement.
Incorrect procedures
could result in death, injury, or property
damage. Learn to use equipment
correctly.
NOTICE: Ensure that stabilizers are in contact with the
ground while sawing. Failure to use stabilizers correctly
will damage equipment.
1. Adjust throttle to low idle.
2. Move attachment speed/direction control to desired speed.
SAW WILL TURN.
3. Slowly lower saw to trench depth.
4. Release parking brake and verify parking brake indicator is
off.
5. Increase engine speed to full throttle.
Flying objects thrown by
machine may strike people. Wear hard hat and
safety glasses.
Moving digging teeth will kill you
or cut off arm or leg. Stay away.
NOTICE:
• Machine might jerk when digging starts. Allow 3’
(1 m) between digging teeth and obstacle.
• Keep everyone at least 6’ (2 m) from machine, attachments,
and their range of movement.
Incorrect procedures
could result in death, injury, or property
damage. Learn to use equipment
correctly.
NOTICE: Ensure that stabilizers are in contact with the
ground while sawing. Failure to use stabilizers correctly
will damage equipment.