Ditch Witch RT115 - Manual (Page 150)

RT115 Tier 3- SERVICE
APPROVED COOLANT
150 RT115 Tier 3 - SERVICE
APPROVED COOLANT
APPROVED COOLANT
This unit was filled with John Deere Cool-Gard coolant before
shipment from factory. Add only John Deere Cool-Gard (p/n 255-
006) or any fully-formulated, ethylene glycol based, low-silicate,
heavy-duty diesel engine coolant meeting ASTM specification
D5345 (prediluted) or D4985 (concentrate) and containing
supplemental coolant additives (SCAs) meeting John Deere
specification JDM H24A2.
NOTICE: Do not use water or high-silicate automotive-type
coolant. This will lead to engine damage or premature engine
failure.
NOTICE: Do not mix heavy-duty diesel engine coolant and
automotive-type coolant. This will lead coolant breakdown and
engine damage.
Incorrect procedures could
result in death, injury, or property damage. Learn
to use equipment correctly.
NOTICES:
• Unless otherwise instructed, all service should be
performed with engine off.
• Refer to engine manufacturer’s manual for engine
maintenance instructions.
• Before servicing equipment, lower unstowed attachments
to ground
APPROVED COOLANT
This unit was filled with John Deere Cool-Gard coolant before
shipment from factory. Add only John Deere Cool-Gard (p/n 255-
006) or any fully-formulated, ethylene glycol based, low-silicate,
heavy-duty diesel engine coolant meeting ASTM specification
D5345 (prediluted) or D4985 (concentrate) and containing
supplemental coolant additives (SCAs) meeting John Deere
specification JDM H24A2.
NOTICE: Do not use water or high-silicate automotive-type
coolant. This will lead to engine damage or premature engine
failure.
NOTICE: Do not mix heavy-duty diesel engine coolant and
automotive-type coolant. This will lead coolant breakdown and
engine damage.
Incorrect procedures could
result in death, injury, or property damage. Learn
to use equipment correctly.
NOTICES:
• Unless otherwise instructed, all service should be
performed with engine off.
• Refer to engine manufacturer’s manual for engine
maintenance instructions.
• Before servicing equipment, lower unstowed attachments
to ground