beautypg.com

Ditch Witch RT115 User Manual

Page 206

background image

RT115 Tier 3- SERVICE

AS NEEDED

206

RT115 Tier 3 - SERVICE

AS NEEDED

11. Unclamp links. Slowly release cable and lower chain to

ground.

12. Lay chain on ground with teeth down.

To install chain:

1.

Lay chain on ground with teeth down and pointed toward unit.

2.

Fasten and adjust seatbelt.

3.

Start tractor. See TRACTOR for start-up procedures.

4.

Disenage parking brake and verify parking brake indicator is
off.

5.

Move ground drive control to reverse.

6.

Back unit up until chain extends past head shaft about 1’ (305
mm).

7.

Move ground drive control to neutral.

8.

Lower backfill blade to ground.

9.

Lower boom to horizontal position.

10. Engage parking brake and verify parking brake indicator is

on.

11. Turn ignition switch to STOP.

12. Pull rear end of chain over and about 10" (260 mm) past tail

roller.

13. Use hoist to pull front end of chain over head shaft sprocket.

14. Move chain down boom until chain connector pin and lock

key can be installed. Install connector pin and lock key.

Crushing weight

could cause death or serious
injury. Use proper procedures and
equipment or stay away.

11. Unclamp links. Slowly release cable and lower chain to

ground.

12. Lay chain on ground with teeth down.

To install chain:

1.

Lay chain on ground with teeth down and pointed toward unit.

2.

Fasten and adjust seatbelt.

3.

Start tractor. See TRACTOR for start-up procedures.

4.

Disenage parking brake and verify parking brake indicator is
off.

5.

Move ground drive control to reverse.

6.

Back unit up until chain extends past head shaft about 1’ (305
mm).

7.

Move ground drive control to neutral.

8.

Lower backfill blade to ground.

9.

Lower boom to horizontal position.

10. Engage parking brake and verify parking brake indicator is

on.

11. Turn ignition switch to STOP.

12. Pull rear end of chain over and about 10" (260 mm) past tail

roller.

13. Use hoist to pull front end of chain over head shaft sprocket.

14. Move chain down boom until chain connector pin and lock

key can be installed. Install connector pin and lock key.

Crushing weight

could cause death or serious
injury. Use proper procedures and
equipment or stay away.