Ditch Witch RT115 - Manual (Page 127)

RT115 Tier 3 - SAW ATTACHMENT 127
OPTIONAL EQUIPMENT
RT115 Tier 3 - SAW ATTACHMENT 127
OPTIONAL EQUIPMENT
OPTIONAL EQUIPMENT
Bits and Bit Holders
Using worn bits and bit holders will reduce efficiency and damage
equipment. Replacement bits and bit holders are available from
your Ditch Witch dealer.
Block Repair Jigs
If the block or plate housing bit holder is worn or damaged, a new
block can be welded to the segment. Use Block Repair Jig
available from your Ditch Witch dealer and an E7018 or
equivalent.
NOTICE: Welding can damage electronics.
• Welding currents can damage electronic components.
Always disconnect the ECU ground connection from the
frame, harness connections to the ECU, and other
electronic components prior to welding on machine or
attachments. Connect welder ground close to welding point
and make sure no electronic components are in the ground
path. We recommend that NO WELDING signs be
prominently displayed on machine.
• Disconnect battery at battery disconnect switch before
welding to prevent damage to battery.
• Do not turn off battery disconnect switch with engine
running, or alternator and other electronic devices may be
damaged.
OPTIONAL EQUIPMENT
Bits and Bit Holders
Using worn bits and bit holders will reduce efficiency and damage
equipment. Replacement bits and bit holders are available from
your Ditch Witch dealer.
Block Repair Jigs
If the block or plate housing bit holder is worn or damaged, a new
block can be welded to the segment. Use Block Repair Jig
available from your Ditch Witch dealer and an E7018 or
equivalent.
NOTICE: Welding can damage electronics.
• Welding currents can damage electronic components.
Always disconnect the ECU ground connection from the
frame, harness connections to the ECU, and other
electronic components prior to welding on machine or
attachments. Connect welder ground close to welding point
and make sure no electronic components are in the ground
path. We recommend that NO WELDING signs be
prominently displayed on machine.
• Disconnect battery at battery disconnect switch before
welding to prevent damage to battery.
• Do not turn off battery disconnect switch with engine
running, or alternator and other electronic devices may be
damaged.