Ditch Witch FXT60 - Manual (Page 38)

FX60/FXT60 Tier 4 Operator’s Manual
Controls - 37
Power Pack
CMW
®
Item Description Notes
1. Hydraulic fluid
temperature indicator Indicates hydraulic fluid
temperature is above 215°F
(102°C). Engine will stop.
Check hydraulic fluid level.
2. Blower temperature
indicator Indicates blower discharge
temperature is above 335°F
(168°C). Engine will stop.
1. Check for air flow obstructions.
2. Let blower cool before restarting.
3. Engine speed (RPM) Displays engine RPM.
4. Diagnostic message
indicator indicates a warning
code
indicates a stop code
5. Wait-to-start indicator Indicates glow plugs are
operating.
Wait until light goes off before
starting engine. See “Cold
Start Procedure” on page 57.
To help avoid injury: Do not use
ether or starting fluid.