Ditch Witch FXT60 - Manual (Page 111)

Service - 110
FX60/FXT60 Tier 4 Operator’s Manual
100 Hour
CMW
®
Lube Blower
Wipe two zerks clean and lube every 100 hours
with HTG. Inject grease into zerk until clean
grease comes out of relief fittings.
Debris Tank
Check Tank Mounting Bolts
800 Tanks
Check vacuum tank mounting bolts (shown, on
both sides) every 100 hours for looseness and
damage. Tighten or replace as needed.
1200 Tank
Check vacuum tank mounting bolts (shown, both
sides) every 100 hours for looseness and
damage. Tighten or replace as needed.
NOTICE: Do not inject grease too quickly. Drive
shaft seal damage could occur.
j35om071h.eps j35om071h.eps
j35om071h.eps j35om071h.eps