Ditch Witch FXT60 - Manual (Page 35)

Controls - 34
FX60/FXT60 Tier 4 Operator’s Manual
Power Pack
CMW
®
5. Light switch To turn on, press top.
To turn off, press bottom.
6. Ignition switch To start engine, insert key and
turn clockwise.
To stop engine, turn key
counterclockwise.
IMPORTANT: When engine is on,
blower operates and vacuum is
present at tank inlet.
7. Throttle To increase engine speed,
rotate clockwise.
To decrease engine speed,
rotate counterclockwise.
8. Hydraulic return
connector To operate hydraulic power
tools with power pack
hydraulic system, connect
hydraulic return hose to
connector. IMPORTANT: Connect return hose
before connecting supply hose.
9. Hydraulic flow control To increase hydraulic flow to
tool, move handle toward
horizontal position.
To decrease hydraulic flow to
tool, move handle toward
vertical position.
Maximum output is 7.5 gpm (28 L/
min) at 2000 psi (138 bar).
IMPORTANT:
• Stop flow before connecting or
disconnecting hydraulic tools.
• Leave flow at 0 unless hoses are
connected.
Item Description Notes
c00ic258h.eps