Bimba STP-10 - Manual (Page 3)

STP-10 Hardware Manual
3
Introduction
Thank you for selecting a Bimba DC stepper motor control. We hope our dedication to performance, quality and economy will
make your motion control project successful.
If there’s anything we can do to improve our products or help you use them better, please call or fax. We’d like to hear from you.
Our phone number is (800) 44-BIMBA, or you can reach us by fax at (708) 235-2014. You can also email [email protected].
Features
• Programmable, microstepping digital step motor driver in compact package
• STP-10 operates from a 24 to 80 volt DC power supply
• Operates in velocity or position mode
• Accepts analog signals, digital signals and RS-232 serial commands
• Optional RS-422/485 communication
• Optional encoder feedback
• Optional 100 Mbit Ethernet communication using SCL and IQ Programming
• Optional Ethernet/IP protocol communication
• STP-10 provides motor current up to 10 amps/phase (peak of sine)
• Eight optically isolated digital inputs
• Four optically isolated digital outputs
• Two ±10 volt analog inputs for speed and position control. Can also be configured for 0 to 10V, ±5V or 0 to 5V signal
ranges.