Bimba ITM-23Q IntelliMoto User Manual
Itm-23q intellimotor, Quick start guide
Requirements
To begin, make sure you have the following equipment:
•
A small flat blade screwdriver for tightening the connectors (Bimba screwdriver included).
•
A personal computer running Microsoft Windows 98, 2000, ME, NT, XP, Vista,7 (32 and 64 bit), or 8.
•
IQ® stepper software (available at www.bimba.com).
•
For RS-232 models: a Bimba programming cable (included).
•
For RS-485 models: a RS-422 or RS-485 port or adapter for your PC (see page 2 for recommended RS-485 adapter).
•
For more detailed information, please download and read the ITM-23Q Hardware Manual available at www.bimba.com.
Step 1
Step 2
ITM-23Q IntelliMotor
®
Quick Start Guide
Quick Start Guide
a)
Download and install the IQ
®
stepper software.
b)
Launch the software by clicking:
Start / All Programs / Bimba / IQ
®
stepper
c)
Select the correct COM port using the drop down list.
d)
Connect the drive to your PC using the RS-232 programming cable or
RS-422/485 adaptor.
Wire the drive to the DC power source.
(do not apply power until all connections to the drive have been made)
Note, the ITM-23Q accept DC voltages from 24-48 Vdc.
(Recommended Bimba P/N PWR-150A24)
If using an external fuse, we recommend the following:
ITM-23Q
: 3AG, 4 amp (Littlefuse 313004P)
See Bimba ITM-23Q Hardware Manual for more information about
power supply and fuse selection.
+
-
STEP+
STEP-
DIR+
DIR-
EN+
EN-
OUT+
OUT-
+5V
AIN
GND
Step 2