American Energy Systems Ovation - Manual (Page 40)

Version 7.1 40
INSTALLATION, GENERAL RULES
Country Flame strongly recommends hiring a certified installer to professionally install your OV26-BF-
I Insert. These professionals have been trained and maintain a working knowledge of the latest codes,
technology and procedures to ensure a safe and efficient installation. As a minimum, the following
installation guidelines should be adhered to:
1. Install the OV26-BF-I insert only in a masonry fireplace or listed zero clearance fireplace that
is at least 25 inches wide, 21 inches high, and 14 inches deep. The masonry fireplace should
have a UL Listed liner installed in the chimney. The chimney should be at least 15 feet high.
2. The masonry fireplace must be constructed in accordance with local and national building
codes. Be sure the fireplace and chimney are clean and sound without any cracks or loose
mortar. Do not remove bricks or mortar from the wood-burning fireplace to accommodate
installation of the Ovation OV26-BF-I insert stove.
3. Have the masonry fireplace and chimney professionally cleaned and inspected before installing
the OV26-BF-I Insert.
4. Remove the damper plate or wire the damper plate open with a heavy gauge wire.
5. FIGURE 21 shows a typical OV26-BF-I Insert installed in a masonry fireplace.
FIGURE 21: OV26-BF-I INSERT
OVATION MODEL OV-26BF-I INSERT (BAY FLAME)