American Energy Systems MagnuM ZC - Manual

MAGNUM ZC GAS
INSTALLATION AND OPERATION MANUAL
The Magnum ZC Zero Clearance Wood/Gas burning appliance can be adapted for use either with
Wood or Gas. Particular attention needs to be paid to the following guidelines for installation and
operation of your Magnum ZC appliance.
!
Installation requirements of the Magnum ZC appliance are the same whether you are installing
it for wood or gas.
!
2100-degree metal insulated or metal air-cooled venting must be used with wood and/or gas.
!
All clearance requirements are the same for gas as it is for wood burning.
!
Do not burn wood in a Magnum ZC that has been changed over to gas unless the gas log kit has
been removed by a professional service man trained to work on the Magnum ZC appliance.
!
Do not operate the Magnum ZC gas equipped appliance until you have read and understand the
operations section of this manual.