Specifications – Denon AVR-2809CI User Manual
Page 85
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
n
Audio section
• Power amplifier
Rated output:
Front (A, B):
115 W + 115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W + 145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
115 W + 115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W + 145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround Back:
115 W + 115 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
145 W + 145 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Dynamic power:
130 W x 2ch (8 Ω/ohms)
180 W x 2ch (4 Ω/ohms)
Output connectors:
Front:
A or B
6 ~ 16 Ω/ohms
A + B
8 ~ 16 Ω/ohms
Center, Surround, Surround Back:
6 ~ 16 Ω/ohms
• Analog
Input sensitivity / Input impedance:
200 mV / 47 kΩ/kohms
Frequency response:
10 Hz ~ 100 kHz — +1, –3 dB (DIRECT mode)
S/N:
102 dB (IHF-A weighted, DIRECT mode)
Distortion:
0.005 % (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S /N ratio — 102 dB
Dynamic range — 96 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
S/N:
74 dB (A weighting, with 5 mV input)
Rated output:
150 mV
Distortion factor:
0.03 % (1 kHz, 3 V)
n
Video section
• Standard video connectors
Input / output level and impedance:
1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to “OFF”)
• S-Video connectors
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
C (color) signal — 0.286 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB (when video convert set to “OFF”)
• Color component video connector
Input / output level and impedance:
Y (brightness) signal — 1 Vp-p, 75 Ω/ohms
P
B
/ C
B
signal — 0.7 Vp-p, 75 Ω/ohms
P
R
/ C
R
signal — 0.7 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz ~ 100 MHz — +0, –3 dB (when video convert set to “OFF”)
n
Tuner section
[FM]
[AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
-15
W)
Receiving Range:
87.5 MHz ~ 107.9 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB
STEREO 72 dB
Total harmonic Distortion (at 1 kHz): MONO
0.15 %
STEREO 0.3 %
n
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
6.0 A
0.1 W (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 414 (D) mm (17-3/32” x 6-47/64” x 16-19/64”)
Weight:
12.8 kg (28 lbs 3.5 oz)
n
Main remote control unit (RC-1102)
Batteries:
LR6/AA type (two batteries)
Maximum external dimensions:
63 (W) x 238 (H) x 31 (D) mm (2-31/64” x 9-3/8” x 1-7/32”)
Weight:
190 g (Approx 6.7 oz) (including batteries)
n
Sub remote control unit (RC-1106)
Batteries:
R03/AAA type (two batteries)
Maximum external dimensions:
54 (W) x 115 (H) x 23 (D) mm (2-1/8” x 4-17/32” x 29/32”)
Weight:
80 g (Approx 2.8 oz) (including batteries)
z
For purposes of improvement, specifications and design are subject to change without notice.
Specifications
Specifications