Denon AVR-2809CI - Manual (Page 61)

Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
3 -
065
015*$"-
065
"6%*0
"6%*0
R L
R L
065
)%.*
*/
)%.*
• To cancel, press , then turn
SELECT> until “ZONE2 Source” is displayed.
• Make a test recording before starting the actual recording.
• Signals are only output to the analog REC OUT connectors when
the digital signals input to the digital input connectors (OPTICAL/
COAXIAL) are PCM (2-channel) signals.
• Digital audio signals input to the HDMI connectors are not output
to the REC OUT connectors, so connect using the OPTICAL or
COAXIAL connectors.
• Sources selected with the REC OUT mode are output from ZONE2
as well.
• In the REC OUT mode, the remote control unit’s ZONE2 mode
buttons cannot be operated.
• The “XM” digital audio output signal is not output from the OPTICAL2
output connector.
Convenient Functions
HDMI Control Function
When AVR-2809CI is connected to a TV and player compatible
with HDMI control function, you can perform the following
operations.
Settings other than AVR-2809CI settings must be made on the
respective devices. (Check the operating instructions of each
device for details.)
NOTE
When using the HDMI control function, do not assign HDMI input to “TV/
CBL” by setting “Input Setup” – “Assign” – “HDMI In” in the menu. • When you want to listen to TV audio by AVR-2809CI, connect optical
digital or analog.
If the TV you are using has both connection jacks, use the optical
digital connection.
• When using these functions set as follows: menu “Manual Setup” –
“HDMI Setup” – “HDMI Control” set to “ON“ (vpage 29).
• AVR-2809CI power off can be linked to the TV power off step.
When you set “Output audio from amp” in the TV audio output
setup operation, you can switch the amp power on.
• You can switch audio output devices with a TV operation.
(When outputting from the TV speakers, output switches from
speakers connected to AVR-2809CI).
• You can adjust AVR-2809CI volume in the TV volume adjustment
operation.
• You can switch AVR-2809CI input source through linkage to TV input
switching.
• When playing the player, the AVR-2809CI input function switches to
the function of that player.
NOTE
• Recordings you make are for your personal enjoyment and should
not be used for other purposes without permission of the copyright
holder.
• Input sources for which “Delete” is selected at “Source Delete”
cannot be selected.
Connections
Player compatible
with HDMI
control function
Television compatible with
HDMI control function
Pla
ybac
k