Denon AVR-2809CI - Manual (Page 69)

Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
1
Press [MODE SELECTOR] for the device you want to
reset.
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
4
Press the button you want to reset twice.
The signal transmission indicator flashes twice.
Resetting the Main Remote Control Unit
Learning Function
G Resetting button by buttonH
1
Press [MODE SELECTOR] for the device you want to
reset.
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press [9] , [7] and [6] , in that order.
The signal transmission indicator flashes twice.
4
Press [MODE SELECTOR] for the device you want to
reset twice.
The signal transmission indicator flashes twice.
G Resetting by device modeH
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [7] and [8] , in that order.
The signal transmission indicator flashes twice.
3 Press [SYSTEM CALL] ( 1 , 2 or 3 ) you want to reset.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1
Press [MODE SELECTOR] for the device you want to
reset (TV or SAT/CBL).
2
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
3 Press [9] , [8] and [4] , in that order.
The signal transmission indicator flashes twice.
4
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
1
Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [9] , [8] and [1] , in that order.
The signal transmission indicator flashes 4 times.
All the settings are restored to their defaults.
System Call Function
Punch-Through Function
All Settings
Sub Remote Control Unit
(RC-1106)
The sub remote control unit (RC-1106) included with the AVR-
2809CI can be used as the exclusive multi-zone remote control
unit.
b
The following describes operation for the selected zone. (Use
[ZONE SELECT] to switch zones.)
• Turning the multi-zone power on and off
• Selecting the input source to be played
• Adjusting and temporarily muting the multi-zone volume
• Listening to the tuner (TUNER, XM and SIRIUS)
• Operating an iPod (Note that the [FAVORITES DIRECT PLAY]
button can only be used with the ASD-3N or ASD-3W.)
[POWER OFF]
[SOURCE SELECT]
[TUNING + / –]
[8], [9]
[2], [1/3]
[CHANNEL + / –]
[REPEAT]
[POWER ON]
[VOLUME + / –]
[MUTE]
[SHIFT]
[RANDOM]
[ZONE SELECT]
[FAVORITES
DIRECT PLAY]
ZONE SELECT Switching the zone to be operated
POWER OFF Power off
POWER ON Power on
SOURCE SELECT Switching the input source
VOLUME + / – Volume control
CHANNEL + / – Preset channel + / –
TUNING + / – Tuning + / –
MUTE Muting
SHIFT Switching the memory block
8 9 Auto search (cue)
2 Stop
1 /3 Play / Pause
REPEAT 1-track / All -track repeat play
RANDOM 1-track / album shuffle play
b When using a control dock for iPod (ASD-1R or ASD-11R),
[FAVORITES DIRECT PLAY] cannot be used.
Adjusting the Backlight’s Brightness
The display’s brightness can be adjusted in 5 steps.
(Default: Step 3)
1 Press and hold in [RC SETUP] for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press [CHANNEL +] or [CHANNEL –] .
The display gets one step brighter when [+] is pressed.
The display gets one step darker when [–] is pressed.
3
Press [RC SETUP] to complete the setting.
Remot
e Contr
ol