Denon AVR-2809CI User Manual
Page 68
Get
ting Star
ted
Connections
Set
up
Pla
ybac
k
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
System Call Function
This function lets you register a series of operations at a single
button.
For example, the amplifier can be turned on, the input source
selected, the monitor’s power turned on, the source device’s
power turned on and the play mode set all by pressing a single
button.
Up to 32 signals each can be registered at
[SYSTEM CALL]
(
1
,
2
or
3
).
5
Press the buttons you want to register in the same
sequence as the operations you want to perform.
The signal transmission indicator lights when a button is
pressed.
Example : Press
[POWER ON]
.
↓
Press
[MODE SELECTOR]
–
[DVD]
.
↓
Press
[
1
]
.
b
The mode can be switched by pressing
[MODE SELECTOR]
.
b
Perform the registration procedure for all the buttons you want to
register.
6
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice and the setting
is completed.
Calling out
1
Press
[AMP]
, to select “SYSTEM CALL”.
2
Press
[SYSTEM CALL]
(
1
,
2
or
3
) at which the signals
were registered.
The registered signals are transmitted in the registered
sequence.
Punch Through Function
DVD (including BD and CD) or VCR mode buttons can be stored at
unused TV or SAT/CBL mode buttons.
For example, when DVD mode buttons are assigned to the TV
mode, the DVD mode operations can be performed while in the
TV mode.
5
Press
[MODE SELECTOR]
for the device you want to
punch through (DVD or VCR).
6
Press the button you want to punch through (1, 2,
6
, 7, 8, 9 or 3).
7
Press
[MODE SELECTOR]
for the device you want to
punch through (TV or SAT/CBL).
8
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice and the setting
is completed.
Setting the Time the Backlight Stays Lit
1
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice.
2
Press
[9]
,
[7]
and
[3]
, in that order.
The signal transmission indicator flashes twice and the backlight
on time setting mode is set.
3
Set the light on time.
The signal transmission indicator flashes twice.
[Settable times] :
[1]
: 5 sec.
[2]
: 10 sec. (Default)
[3]
: 15 sec.
[4]
: 20 sec.
[5]
: 25 sec.
[NUMBER]
[SYSTEM CALL]
[8],[9],
[6],[7],
[1], [3],[2]
[CHANNEL + −]
[POWER ON]
[ AMP]
[RC SETUP]
[MODE
SELECTOR]
[ DVD]
Signal transmission
indicator
1
Press
[MODE SELECTOR]
for the device you want to
register.
2
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice.
3
Press
[9]
,
[7]
and
[8]
, in that order.
The signal transmission indicator flashes twice and the system
call registration mode is set.
4
Press
[SYSTEM CALL]
(
1
,
2
or
3
) at which you want to
register the signals.
Registering
1
Press
[MODE SELECTOR]
for the device you want to
punch through (DVD or VCR).
2
Press
[MODE SELECTOR]
for the device you want to
punch through (TV or SAT/CBL).
3
Press and hold in
[RC SETUP]
for at least 3 seconds.
The signal transmission indicator flashes twice.
4
Press
[9]
,
[8]
and
[4]
, in that order.
The signal transmission indicator flashes twice and the punch
through setting mode is set.
Remot
e Contr
ol