Multi-zone operations, Turning the power on and off, Turning off the sound temporarily – Denon AVR-2809CI User Manual

Page 72: Selecting the input source, Adjusting the volume

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Remot

e Contr

Inf
or

mation

oubleshooting

Specifi

cations

(Main remote control unit)

(Sub remote control unit)

Multi-zone Operations

Turning the Power On and Off

Operation on the main unitH

Press

for the zone to be

operated.
When the power turns on, the multi-zone indicator (

)

lights on the display.

Operation on the remote control unitH

In the zone mode you want to operate, press

[ZONE2 ON]

[ZONE3

ON]

[ZONE OFF]

[ZONE3 OFF].

Turning off the Sound Temporarily

In the zone mode for which you want to mute the sound, press

[MUTE]

The sound is reduced to the level set at menu “Manual Setup” – “Zone
Setup” – “(select the zone)” – “Mute Level” (vpage 32).
To cancel, either adjust the volume or press

[MUTE]

again.

The setting is canceled when the zone’s power is turned off.

• The source selected for ZONE2 is also output from the recording

output connectors.

• When the input source to which the digital input connectors

(OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3,
playback is only possible if the digital signal being input is in PCM
(2-channel) format.

NOTE

• Digital audio signals input from the HDMI connectors cannot be

played in multi-zone.

• When certain digital signals are being input, noise may be output

from the ZONE2 and ZONE3 audio output connectors.

Selecting the Input Source

Operation on the main unitH

Press

and select the zone to be

adjusted.

Turn <

SOURCE SELECT

Operation on the remote control unitH

In the zone mode you want to operate, press

[SOURCE SELECT]

Adjusting the Volume

Operation on the main unitH

Press

and select the zone to be

adjusted.

Turn

to adjust.

Operation on the remote control unitH

In the zone mode whose volume you want to adjust, press

[VOLUME]

– – –

–70dB

–40dB

+18dB

[Variable range]

• The volume can be adjusted when menu “Manual Setup” – “Zone

Setup” – “(select the zone)” – “Volume Level” is set to “VAR”. The
volume can be increased up to the value set at menu “Manual Setup”
– “Zone Setup” – “(select the zone)” – “Volume Limit” (vpage
32).

• The volume for ZONE2 and ZONE3 can be adjusted with the remote

conrol unit.

• Also press

[SOURCE SELECT]

when in standby mode, the power

turns on.

• When using ZONE2 or ZONE3, it is possible to turn the power for the

MAIN ZONE only on or off by pressing

[MAIN ZONE ON]

[MAIN

ZONE OFF]

VOLUME

SOURCE SELECT

[ZONE3 ON]

[ZONE3 OFF]

[POWER OFF]

SOURCE SELECT

[POWER ON]

VOLUME
[MUTE]

Button located on both the main unit
and the remote control unit

BUTTON

Button only on the main unit