Denon AVR-2809CI - Manual (Page 33)

0
Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifications
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).
F Menu screen F
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone Setup
5.Option Setup
3.Audio Setup
Audio Setup
Make settings for audio playback.
2.2ch Direct/Stereo
3.Dolby Digital Setup
4.Auto Surround Mode
5.EQ Preset
1.EXT.IN SW Level
2-3.Audio Setup
s 2ch Direct/Stereo
Make speaker settings for 2-channel mode playback.
Setting
To change the settings, select “Custom”.
[Selectable items]
Basic : Use the same settings as in “Speaker Setup”.
Custom : Make separate settings for 2-channel mode.
a EXT. IN Subwoofer Level
Set the subwoofer level for playback.
[Selectable items] 0dB +5dB +10dB +15dB
We recommend setting to “+15dB”.
Front
Select front speaker size.
[Selectable items]
Large Small
: Select front speaker size.
Subwoofer
Select subwoofer use.
[Selectable items]
Yes No
: Select subwoofer use.
Subwoofer Mode
Select low range signal to be reproduced by subwoofer.
[Selectable items]
LFE LFE+Main
: Select subwoofer signal.
Crossover
Select crossover frequency from which subwoofer handles low range
signal.
[Selectable items]
40Hz 60Hz 80Hz 90Hz 100Hz 110Hz 120Hz 150Hz
200Hz 250Hz
: Select crossover frequency.
Distance FL
Set distance from listening position to front left speaker.
[Variable range] 0.0ft ~ 60.0ft
Distance FR
Set distance from listening position to front right speaker.
[Variable range] 0.0ft ~ 60.0ft
NOTE
Set the distance between the listening position and the various
speakers to no more than 20.0 ft (6.00 meters).
[Selectable items]
AMP
: Use speakers connected to receiver for audio playback.
TV
: Use speakers of TV for audio playback.
f HDMI Audio Out
Select HDMI audio output device.
NOTE
When the HDMI control function is operating, the setting of audio
playback in the connected TV takes priority
(vpage 58 “HDMI
Control Function”).
g HDMI Control
Make settings for HDMI control function.
[Selectable items] ON OFF
Please consult the operating instructions for each connected device
to check the settings.
NOTE
For details, see “HDMI Control Function” (vpage 58).
[Selectable items] ON OFF
• This can be set when “HDMI Control“ is set to “ON“.
• Please consult the operating instructions for each connected device
to check the settings.
NOTE
• When the “HDMI Control” setting has been changed, always turn
off the power to the connecting devices afterwards and then turn
back on.
• The “HDMI Control” and “Power Off Control” does not work
when the power to the equipment is off. Either power on or set to
standby.
• For details, see “HDMI Control Function” (vpage 58).
h Power Off Control
Interlock power OFF with HDMI control.
Set
up