Setting 3 – Denon AVR-2809CI User Manual

Page 71

Get
ting Star

ted

Connections

Set
up

Pla
ybac

k
Remot

e Contr

Inf
or

mation

oubleshooting

Specifications

Setting 3 :

Making bi-amp connections for the FL and FR channels in the MAIN ZONE

and conducting 5.1-channel playback

(switching with other modes not possible)

FL SW

MAIN ZONE

5.1ch

FL/FR

Bi-Amp

Front A Bi-Amp

Amp Assign mode:

Front B Bi-Amp

Amp Assign mode setting and speakers connected to the various speaker

terminals

Speaker terminal

Amp Assign mode

FRONT-A

FRONT-B

CENTER

SURROUND

SURROUND BACK /

AMP ASSIGN

Front A Bi-Amp

FR-A FL-A FR-B FL-B

Front B Bi-Amp

FL-A/FR-A Bi-Amp

connection

FL-B/FR-B Bi-Amp

connection

The Front A or Front B channel for Bi-Amp use is output from the speakers connected to the SURR.BACK/
AMP ASSIGN terminals.

ZONE3 audio output

MAIN ZONE (7.1-channel system)

Monitor

ZONE2

ZONE3

Blu-ray Disc player /

DVD player

Input

Remote
control unit

ZONE2
audio output

ZONE2
video output

AVR-2809CI

Monitor

Power amplifier

: Multi-zone video cable
: Multi-zone audio cable

• When only using one speaker for ZONE2 or ZONE3, set to “Mono”. In this case, the ZONE2 (ZONE3)

monaural output is output from the ZONE2 (ZONE3) pre-out L and R connectors, so connect as desired.

• Separate power amplifiers are needed for ZONE2 and ZONE3.

Connectors for audio output

Audio signals

Connectors for video output

ZONE2

ZONE2 PRE OUT

Stereo

ZONE2 VIDEO OUT

ZONE3

ZONE3 PRE OUT

Stereo

–

Multi-zone Settings and Operations with Zone

Output

Prepare power amplifiers for ZONE2 and ZONE3.

Remote
control unit

Speaker terminal

Amp Assign mode

FRONT

CENTER

SURROUND

SURROUND BACK /

AMP ASSIGN

7.1ch

SBR

SBL

Amp Assign mode setting and speakers connected to the various speaker

terminals

• Conduct with this setting during 5.1-channel playback without multi-channel play (Setting 1).
• The surround back channel is output from the speakers connected to the SURR.BACK/AMP ASSIGN

terminals.

Multi-z

one