Listening to fm/am broadcasts, Playing video and audio equipment – Denon AVR-2809CI User Manual
Page 54
Get
ting Star
ted
Connections
Set
up
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifi
cations
1
Either turn
or press
[TUNER]
(AMP mode) to select “TUNER”.
2
When using the main remote control unit to operate,
press
[NET/TU]
to select
mode.
(vpage 61 “Remote Control Unit Operations”)
3
Press
[BAND]
to select “FM” or “AM”.
4
Tune in the desired broadcast station.
q
To tune in automatically (Auto Tuning)
Press
[MODE]
to light the “AUTO” indicator on the display, then
use
[
]
to select the station you want to hear.
w
To tune in manually (Manual Tuning)
Press
[MODE]
to turn off the display’s “AUTO” indicator, then use
[
]
to select the station you want to hear.
Listening to FM/AM Broadcasts
Basic Operation
Playing Video and Audio
Equipment
1
Prepare the equipment.
q
Load the BD, DVD, CD or other software in the player.
(vSee the operating instructions of the respective equipment.)
w
To play a video equipment, switch the monitor input.
(vSee the monitor’s operating instructions.)
2
Use
SOURCE SELECT
to select the input source.
3
Start playback.
(vSee the operating instructions of the respective equipment.)
Basic Operation
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
[
]
to
change frequencies continuously.
• The time (default : 30sec) for which the on-screen display are
displayed can be set at “Manual Setup” – “Option Setup” – “On-
Screen Display” (vpage 33).
Press
uio
p
to return to the original screen.
The main remote control unit can be used to operate external devices.
See “Remote Control Unit Operations” (vpage 61).
Presetting Radio Stations
(Preset Memory)
Your favorite broadcast stations can be preset so that you can
tune them in easily. Up to 56 stations can be preset.
1
Tune in the broadcast station you want to preset.
2
Press
[MEMO]
.
3
Press
[A ~ G]
to select the block in which the station is
to be preset.
4
Press
[CHANNEL + –]
or
[NUMBER (1 ~ 8)]
to select
the preset number.
5
Press
[MEMO]
again to complete the setting.
• To preset other stations, repeat steps 1 to 5.
• Stations can be preset automatically at menu “Input Setup” – “Auto
Preset” (vpage 36).
NOTE
Preset stations are erased by overwriting them.
SOURCE SELECT
uiop
[NUMBER
(0 ~ 9)]
[ NET/TU]
[BAND]
[MODE]
[MEMO]
[A ~ G]
[CHANNEL + –]
[SEARCH]
[ENTER]
uiop
[ ]
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit
Button only on the remote control unit
[BUTTON]
Symbols used to indicate buttons in this manual
SOURCE
SELECT
[TUNER]
[ AMP]
(
mode)
(AMP mode)
Pla
ybac
k