Playback, Preparations – Denon AVR-2809CI User Manual

Page 53

Get
ting Star

ted

Connections

Set
up

Remot

e Contr

Multi-z

one

Inf
or

mation

oubleshooting

Specifi

cations

Preparations

Press

The power indicator lights red and the power is set to the
standby mode.

Press

[POWER ON]

The power indicator fl ashes green and the power turns on.

Also press

[SOURCE SELECT]

when in standby mode, the power

turns on. In this case the input source is selected by main remote
control unit.

Also press

[QUICK SELECT]

when in standby mode, the power

turns on. In this case Quick Select is selected.

Turning the Power Off

Press

[POWER OFF]

The power is set to the standby mode.

Press

The power indicator turns off, and so does the power.

NOTE

Power continues to be supplied to some of the circuitry even when the
power is in the standby mode. When leaving home for long periods of
time or when traveling, either press

to turn off the power,

or unplug the power cord from the power outlet.

Turning the Power On

Selecting the Input Source

If “ZONE2/3 / Rec Select”, “Tuning Preset” or “Video Select” is
selected, press

before turning

Either turn

or press

[MASTER

VOLUME]

[Variable range]

– – –

–80.0dB ~ 18.0dB

Operations During Playback

Adjusting the Master Volume

Press

[MUTE]

• The sound is reduced to the level set at menu “Manual Setup“ –

“Option Setup” – “Volume control” – “Mute Level”.

• To cancel, press

[MUTE]

again. Muting can also be canceled by

adjusting the master volume.

Plug the headphones into the PHONES

jack on the main

unit.

The sound from the speakers and pre-out connectors is automatically
cut.

NOTE

Be careful not to set the volume too high when using headphones.

Turning Off the Sound Temporarily (Muting)

Listening with Headphones

Press

SPEAKERS

Front A

Front B

Front A+B

Switching the front speakers

Playback

Select the source using

SOURCE SELECT

Turn

or press

[SOURCE SELECT]

to switch

between input sources.

NOTE

The adjustable range will differ depending upon factors such as the
type of input signal and the channel level setting.

NOTE

When you set to “Custom” with “Front Speaker Setup“, you cannot
operate

(vpage 29).

Pla
ybac

MASTER VOLUME

SOURCE SELECT

SPEAKERS

[QUICK SELECT]

SPEAKERS

[POWER ON],

MASTER VOLUME

[MUTE]

SOURCE SELECT

[POWER OFF]

[ AMP]

PHONES jack

Button located on both the main unit
and the remote control unit

BUTTON

Button only on the main unit