Denon AVR-2809CI - Manual (Page 30)

Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Multi-z
one
Inf
or
mation
Tr
oubleshooting
Specifi
cations
Make detail settings for various parameters.
Manual Setup
F Menu screen F
MENU
1.Auto Setup
2.Manual Setup
3.Input Setup
4.Parameter
5.Information
Speaker Setup
Use this procedure to set the speakers manually or if you wish to
change the settings made with the auto setup procedure.
a Speaker Confi guration
Select speaker confi guration and size.
(bass reproduction capability)
Front Speaker
Select front speaker size.
[Selectable items] Large Small
Subwoofer
Select subwoofer use.
[Selectable items] Yes No
Center Speaker
Select center speaker use and size.
[Selectable items] Large Small None
For details on how to select, set and cancel settings for each menu, see “Menu Operations” (vpage 20).
Even when the surround back speaker setting is other than
“None”, sound may not be emitted from the surround back
speaker, depending on the playback source. In this case, make
a menu “Parameter” – “Surround Parameter” – “SB CH Out”
setting other than “OFF” (vpage 44).
Large
: Select this when using large speakers with ample low
frequency reproduction capabilities.
Small
: Select this when using small speakers without ample low
frequency reproduction capabilities.
None
: Select this when no speaker is connected.
Yes
: Select this when a subwoofer is connected.
No
: Select this when no subwoofer is connected.
2spkrs 1spkr
:
Select the number of surround back speakers.
Surround Back Speaker
Select surround back speaker use and size.
[Selectable items]
(
Large Small None
)
(
2spkrs 1spkr
)
Surround Speaker
Select surround speaker use and size.
[Selectable items] Large Small None
2.Manual Setup
2.HDMI Setup
1.Speaker Setup
4.Zone Setup
5.Option Setup
3.Audio Setup NOTE
Since “Amp Assign” of AVR-2809CI is set to “ZONE2” by default,
audio is not output from the surround back speakers. When using the
surround back speakers with MAIN ZONE, change the “Amp Assign”
setting to “7.1ch” (vpage 32).
uiop MENU
SOURCE SELECT SPEAKERS
[TEST]
uiop
MENU
SOURCE
SELECT
SPEAKERS
[ AMP]
Button located on both the main unit
and the remote control unit
BUTTON
Button only on the main unit Button only on the remote control unit [BUTTON]Symbols used to indicate buttons in this manual2-1.Speaker Setup2.Subwoofer Setup1.Speaker Config.4.Channel Level5.Crossover Freq.6.Front Speaker Setup3.DistanceSet
up
Button only on the remote control unit [BUTTON]
Symbols used to indicate buttons in this manual
2-1.Speaker Setup
2.Subwoofer Setup
1.Speaker Config.
4.Channel Level
5.Crossover Freq.
6.Front Speaker Setup
3.Distance
Set
up