Step 17, 3 hold the vertical door brace, Door assembly – Arrow Storage Products KM1010 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step 17
Parts Needed For
Door Assembly
• 3719 Door Handle Brace (2)
• 10489 Right and Left Doors (2)
• 10497 Horizontal Door Brace (4)
• 9355 Vertical Door Brace (2)
The steps on this page tell how to
assemble the right door. You will
perform exactly the same procedures
for the left door. Each bolt and screw
in the door requires a washer. Pro
ceed as follows:
1
Attach the
door handle brace
and
handle
to the
door
with
1
bolt as
shown.
Don't tighten the bolt yet.
2
Swing the doorhandle brace up to
the hole in the center of the door and
insert a screw.
3
Hold the
vertical door brace
against the center of the inside sur
face of the door and tu rn the screw to
hold the vertical door brace and door
handle brace in place. Fasten to
door
above
and
below
center
connection using 2 screws.
4
Insert a second bolt in the door
handle and tighten both bolts.
5
Put a
horizontal door brace
onto
the top edge and bottom edge and
fasten
with 1 bolt in the center.
6
Attach the
lower door guides and
bolts
as shown.
7
Repeat steps 1 through 6 for the
left door.
ENDVIE\A/
STEP
30