Step, Note, Frames – Arrow Storage Products KM1010 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
step?
Parts Needed For
Frames
• Door Track Assembly (1)
• Rear Wall Angle Assembly (1)
• Side Wall Angle Assemblies (2)
• Rear Wall Channel Assembly (1)
• Side Wall Channel Assemblies (2)
The main frame pieces give rigidity to
the side walls and provide a surface
for attaching the gables which sup
port the roof.
1
Fasten the
rear wail angle as
sembly
across the inside top of the
rear wall using screws.
2
Fasten the
rear wall channel as
sembly
across the middle of the rear
wall using screws.
3
Fasten the
sidewall angles
across
the inside top of the side panels us
ing screws. Side wall angles must
overlap rear wall angle in corners.
4
Fasten the
side wall channel
assemblies
across the middle of the
side panels using screws. Fasten
overlaps in rear corners with screws.
5 Fasten the
door track assembly
(holes on top) across the top of the
front wall panels using screws. See
the figure.
NOTE
The wall channels behind the
front wall panels will be installed
in a later step.
Wall Angles
Must Face
Inside
Building
STEP
STEP
3
4
Long Leg
on Top
Opening
Facing in
Short Leg
on Bottom
20