Step 16, Roof trim – Arrow Storage Products KM1010 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step 16
Parts Needed For
Roof Trim
• 6015 Side Roof Trim (4)
1
Attach the
side roof trim
to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
NOTE
A single screw fastens both trim
pieces at the overlap.
2
Using your thumb and index finger,
overbend the bottom flange of the
side roof trim and roof panel rib at the
corner inward enough so the right
and left rooftrim caps fit onto right and
left corners.
3
Fasten the roof trim caps to the
side trim using a screw.
29