Wall panels – Arrow Storage Products KM1010 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
s t e p s
Parts Needed For
Wall Panels
• 8995 Wall Panel (6)
Each wall panel has a crimped rib on
one side. The crimped rib should go
underthe rib of the panel that follows
it.
1
Locate all of the
wall panels
and 8995
set each one alongside the building.
2
Be sure that you have the correct
panels in each position. Do this by
overlapping the panels and deter
mining if the holes line up with the
holes in the frame.
3
Fasten the wall panels at the top
and bottom with screws.
4
Fasten the center of each panel to
the wall channel with screws. Fasten
overlapping ribs using a bolt and nut
with two screws.
5
When you have attached all wall
panels in the correct positions, the
building will look like this.
Panels rest on
frame as shown
21